| description:
|
OBJECTID: System-generated unique identifier for each record within the feature classShape: System-generated geometry type of the featureGEODBID: Three-digit code that assigns editing responsibility to a community in the GIS ConsortiumFEATUREID: GIS-Consortium-generated unique identifier for each record within the feature class. All FEATUREIDs start with the GEODBID of the community that owns the recordDATECREATED: Date/time stamp from the moment the GIS record was createdDATEMODIFIED: Date/time stamp from the last moment the GIS record was changedSOURCE: Organization that provided the data. The GIS Consortium standard is to preface the source with the three-letter municipal code of the community providing the data, followed by a dash. Example: VGV-Public WorksSOURCETYPE: Accuracy context for the recordAncillaryRole: Attribute that indicates whether the junction pushes (source) or pulls (sink) flow in a geometric network. Default setting for the GIS Consortium is none.Enabled: Boolean field to indicate whether water is allowed to flow through this featureINSTALLDATE: Date of installation for the real-world feature represented in the feature classLOCATIONDESCRIPTION: Statement illustrating the whereabouts of a featureLIFECYCLESTATUS: Current state of the real-world featureSUBTYPE: Additional designation of the feature. Includes the following:Ball: A valve that opens by turning a handle attached to a ball inside the valve. The ball has an opening through the middle so that when the hole is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle position lets you "see" the valve's position. Butterfly: A valve where a flat circular plate is positioned inside the pipe. The plate has a rod through it connected to an actuator on the outside of the valve. Rotating the actuator turns the plate either parallel or perpendicular to the flow.Cone: A cone valve consists of a shallowly-tapering cone in a tight-fitting socket placed across the flow of the fluid. Gate: A valve that opens by lifting a round or rectangular gate out of the path of flow. Usually designed to be fully opened or closed.Plug: A valve with cylindrical plugs that can be rotated to control flow through the valve.ELEVATION: Ground level height of real-world feature; measured in feet above sea levelWATERTYPE: Designation of water distribution or collection system to which the feature appliesDIAMETER: width of the real-world feature represented in the feature class; measured in inchesBYPASSVALVE: Boolean field to indicate the existence of a bypass valve CURRENTLYOPEN: Boolean field to indicate whether the valve is currently openMOTORIZED: Boolean field to indicate whether the valve is motorizedNORMALLYOPEN: Boolean field to indicate whether the valve is normally openPERCENTOPEN: The percentage the system valve is open. Domain range is from 0 to 100.PRESSURESETTING: The pressure setting of the valve; measured in pounds per square inch (PSI)REGULATIONTYPE: The regulation type used on the valveTURNSTOCLOSE: The number of turns required to close the valveCLOSEDIRECTION: Direction to turn the valve to close it (left or right)OPERABLE: Boolean field to indicate whether the valve is working or notDEVICEID: Unique identifying code for the mechanical part, such as a serial number or model numberCOMMUNITYID: Unique identifying code selected by the communityOWNERSHIP: Organization with jurisdiction over the real-world feature represented in the feature classMAINTAINED: Organization responsible for the care of the real-world feature represented in the feature classDESCRIPTION: Statement illustrating the featureCATEGORY: Retired field required for ArcGIS coverage modelsFID_WSJUNCTIONANNO_LINE: Unique identifier that can be joined to the FEATUREID field of the wsJunctionAnno_LINE feature class to provide a link between the feature and its labelFID_WSUNDERGROUNDENCLOSURE_POLY: Unique identifier that can be joined to the FEATUREID field of the wsUndergroundEnclosure_POLY feature class to provide a link between that feature and the polygonGlobalID: System-generated unique identifier for each record that is required in replicated geodatabasesREPLICAFILTER: Code used to filter data for the creation of custom geodatabases PRODUCTIONNOTES: Technical notes from GIS personnelWEBLINK: URL for a website related to the recordMANUFACTURER: The manufacturer of the equipmentDEPTH: The distance from the top of the structure to its bottom; measured in feetISSERVICE: Boolean field to indicate whether the valve shuts off a service lineDATEABANDONED: Date of abandonment for the real-world feature represented in the feature classCONNECTIONTYPE: The type of connections a valve has that is used to physically join the pipe to valve. This field can contain the same or two different types of connections. Entries should be split with an 'x'. Example: Mechanical Joint x Flared. A system valve has a max of two connections.MODEL: The model of System ValveVALVEKEYTYPE: Type of key needed to turn the valve.ENCLOSURE TYPE: Type of underground enclosure which houses the system valve. Example: BuffaloBox, Valve Vault, Valve Box, Meter Pit.ENCLOUSREINSTALLDATE: Date of installation for the underground enclosure.ENCLOSUREDESCRIPTION: Statement illustrating the underground enclosure.ENCLOSURECOVERMATERIAL: The matter composition of the cover of the underground enclosureENCLOSURECOVERTYPE: The cover on the underground enclosureENCLOSUREFRAMEMATERIAL: The matter composition of the underground enclosureENCLOSUREFRAMETYPE: The frame designation of the underground enclosureENCLOSURERIMELEVATION: Ground level height of underground enclosure; measured in feet above sea levelENCLOSUREINVERTELEVATION: Elevation at the bottom of a enclosure; measured in feet above sea levelENCLOSUREMEASUREMENT1: The horizontal measurement of the underground enclosure; measured in inchesENCLOSUREMEASUREMENT2: The vertical measurement of the underground enclosure; measured in inchesOPERATINGINSTRUCTION: Special instructions for operating the system valveTURNSTOCLOSE: The expected number of turns to close the valveISPRESSURECONNECTION: Indicates if the valve is a pressure connection (a.k.a "hot tap")IMAGELINK: URL for an image related to the record |