| description:
|
OBJECTID: System-generated unique identifier for each record within the feature classShape: System-generated geometry type of the featureGEODBID: Three-digit code that assigns editing responsibility to a community in the GIS ConsortiumFEATUREID: GIS-Consortium-generated unique identifier for each record within the feature class. All FEATUREIDs start with the GEODBID of the community that owns the recordDATECREATED: Date/time stamp from the moment the GIS record was createdDATEMODIFIED: Date/time stamp from the last moment the GIS record was changedSOURCE: Organization that provided the data. The GIS Consortium standard is to preface the source with the three-letter municipal code of the community providing the data, followed by a dash. Example: VGV-Public WorksSOURCETYPE: Accuracy context for the recordAncillaryRole: Attribute that indicates whether the junction pushes (source) or pulls (sink) flow in a geometric network. Default setting for the GIS Consortium is none.Enabled: Boolean field to indicate whether water is allowed to flow through this featureADMINISTRATIVEAREA: Owner of the area in which the feature is locatedINSTALLDATE: Date of installation for the real-world feature represented in the feature class/tableLOCATIONDESCRIPTION: Statement illustrating the whereabouts of a featureOPERATIONALAREA: Retired field used to store a description for an operational area designated by a communityROTATION: Retired GIS tracking field used to turn the symbol that represents the feature on the map so that it matched how it would look in the real worldLIFECYCLESTATUS: Current state of the real-world featureSUBTYPE: Additional designation of the feature. Includes the following:UnknownCompoundCurrentDetector CheckMagnetic Orifice: a magnetic field is applied to a metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines; requires a conducting fluid and an electrical insulating pipe surface.PitotProportional: comprising a chamber housing for a preassembled meter chamber, a bypass plate, and a bypass for mounting within a maincase. The bypass and bypass plate, in cooperation with one another, provide an essentially unrestricted flow path for water to flow through the maincase with little headloss. The chamber housing and bypass plate cooperate to form a flow path for a portion of the water entering and leaving the maincase, so that this portion may be metered by the positive displacement meterPositive DisplacementSonic: battery operated meter that uses sound waves to measure well water levelVenturi: a defined construction with in the meter body which causes an increase in flow velocity at the constriction resulting in a corresponding decrease at that pointPropellerWORKORDERID: Unique work order identifierELEVATION: Ground level height of real-world feature; measured in feet above sea levelWATERTYPE: Designation of water distribution or collection system to which the feature appliesDIAMETER: width of the real-world feature represented in the feature class; measured in inchesFLOWRANGE: The flow range of the meter; units of measure are explained in the fieldMEASUREMENTDATE: The date the last measurement was recorded for the meterLEGACYTYPE: Retired GIS tracking code for the featureDEVICEID: Unique device identifierCOMMUNITYID: Unique identifying code selected by the communityOWNERSHIP: Organization with jurisdiction over the real-world feature represented in the feature classMAINTAINED: Organization responsible for the care of the real-world feature represented in the feature classDESCRIPTION: Statement illustrating the featureMECHANICAL: Retired field required for ArcGIS coverage modelsFID_WSJUNCTIONANNO_LINE: Unique identifier that can be joined to the FEATUREID field of the wsJunctionAnno_LINE feature class to provide a link between the feature and its label.CATEGORY: Retired field required for ArcGIS coverage modelsFID_WSUNDERGROUNDENCLOSURE_POLY: Unique identifier that can be joined to the FEATUREID field of the wsUndergroundEnclosure_POLY feature class to provide a link between the feature and its enclosure.REPLICAFILTER: Code used to filter data for the creation of custom geodatabases PRODUCTIONNOTES: Technical notes from GIS personnelWEBLINK: URL for a website related to the recordGlobalID: System-generated unique identifier for each record that is required in replicated geodatabasesMODEL: The model of meterMANUFACTURER: The manufacturer of the meter |