{ "culture": "en-US", "name": "", "guid": "", "catalogPath": "", "snippet": "A point feature class that represents fittings, which are facilities found at the joint between two pipes where a transition occurs.", "description": "

OBJECTID: System-generated unique identifier for each record within the feature class<\/SPAN><\/P>

Shape: System-generated geometry type of the feature<\/SPAN><\/P>

GEODBID: Three-digit code that assigns editing responsibility to a community in the GIS Consortium <\/SPAN><\/P>

FEATUREID: GIS-Consortium-generated unique identifier for each record within the feature class. All FEATUREIDs start with the GEODBID of the community that owns the record.<\/SPAN><\/P>

DATECREATED: Date/time stamp from the moment the GIS record was created <\/SPAN><\/P>

DATEMODIFIED: Date/time stamp from the last moment the GIS record was changed <\/SPAN><\/P>

SOURCE: Organization that provided the data. The GIS Consortium standard is to preface the source with the three-letter municipal code of the community providing the data, followed by a dash. Example: VGV-Public Works<\/SPAN><\/P>

SOURCETYPE: Accuracy context for the record<\/SPAN><\/P>

AncillaryRole: Attribute that indicates whether the junction pushes (source) or pulls (sink) flow in a geometric network. Default setting for the GIS Consortium is none.<\/SPAN><\/P>

Enabled: Boolean field to indicate whether water is allowed to flow through this feature <\/SPAN><\/P>

INSTALLDATE: Date of installation for the real-world feature represented in the feature class<\/SPAN><\/P>

LOCATIONDESCRIPTION: Statement illustrating the whereabouts of a feature<\/SPAN><\/P>

LIFECYCLESTATUS: Current state of the real-world feature <\/SPAN><\/P>

SUBTYPE: Additional designation of the feature. Includes the following structures:<\/SPAN><\/P>

  • bend: Fitting that connects two pipes where they change direction<\/SPAN><\/P><\/LI>

  • cap: Fitting that seals a pipe by screwing over the opening from the outside<\/SPAN><\/P><\/LI>

  • cross: Fitting that connects four pipes<\/SPAN><\/P><\/LI>

  • coupling: Fitting that connects two pipes<\/SPAN><\/P><\/LI>

  • expansion joint: Fitting with at least one airtight chamber that absorbs movement, stress, or vibrations where two pipes connect<\/SPAN><\/P><\/LI>

  • offset: Fitting that brings one section of pipe out of one line and into a parallel line<\/SPAN><\/P><\/LI>

  • reducer: Fitting that joins two pipes of different sizes<\/SPAN><\/P><\/LI>

  • riser: Fitting with restrictors that allow water to move from a lower to a higher elevation<\/SPAN><\/P><\/LI>

  • saddle: Fitting used to connect a smaller pipe to an existing larger pipe without separating the pipes<\/SPAN><\/P><\/LI>

  • sleeve: Fitting retro-fitted around or inside an existing pipe. Used to extend the life of older or damaged sewers.<\/SPAN><\/P><\/LI>

  • tap: Fitting that connects a lateral to a main<\/SPAN><\/P><\/LI>

  • tee: Fitting used for connecting three pipes together<\/SPAN><\/P><\/LI>

  • weld: Fitting made of PVC that is connected to a PVC pipe with a solvent weld<\/SPAN><\/P><\/LI>

  • wye: Fitting that is Y shaped. Used to connect three pipes to create branch lines<\/SPAN><\/P><\/LI>

  • manifold: fitting that has multiple built in ports designed to further separate the flow of water <\/SPAN><\/P><\/LI><\/UL>

    ELEVATION: Ground level height of real-world feature; measured in feet above sea level<\/SPAN><\/P>

    WATERTYPE: Designation of water distribution or collection system to which the feature applies<\/SPAN><\/P>

    JOINTTYPE: Type of connection between the structure and the pipe<\/SPAN><\/P>

    MATERIAL: Matter composition of the real-world feature <\/SPAN><\/P>

    DIAMETER1: Width of the real-world feature's connection to an adjacent pipe, represented in the feature class; measured in inches <\/SPAN><\/P>

    DIAMETER2: Width of the real-world feature's connection to an adjacent pipe, represented in the feature class; measured in inches <\/SPAN><\/P>

    DIAMETER3: Width of the real-world feature's connection to an adjacent pipe, represented in the feature class; measured in inches <\/SPAN><\/P>

    DIAMETER4: Width of the real-world feature's connection to an adjacent pipe, represented in the feature class; measured in inches<\/SPAN><\/P>

    COMMUNITYID: Unique identifying code selected by the community<\/SPAN><\/P>

    OWNERSHIP: Organization with jurisdiction over the real-world feature represented in the feature class<\/SPAN><\/P>

    MAINTAINED: Organization responsible for the care of the real-world feature represented in the feature class<\/SPAN><\/P>

    DESCRIPTION: Statement illustrating the feature<\/SPAN><\/P>

    ANGLE: The measurement of the angle between two diverging pipes; measured in degrees<\/SPAN><\/P>

    FID_WSJUNCTIONANNO_LINE: Unique identifier that can be joined to the FEATUREID field of the ssJunctionAnno_LINE feature class to provide a link between the feature and its label. <\/SPAN><\/P>

    FID_WSUNDERGROUNDENCLOSURE_POLY: Unique identifier that can be joined to the FEATUREID field of the wsUndergroundEnclosure_POLY feature class to provide a link between the feature and the polygon<\/SPAN><\/P>

    MANUFACTURER: company/organization that produces the real-world feature<\/SPAN><\/P>

    GlobalID: System-generated unique identifier for each record that is required in replicated geodatabases <\/SPAN><\/P>

    REPLICAFILTER: Code used to filter data for the creation of custom geodatabases <\/SPAN><\/P>

    PRODUCTIONNOTES: Technical notes from GIS personnel <\/SPAN><\/P>

    WEBLINK: URL for a website related to the record <\/SPAN><\/P>

    DATEABANDONED: Date of abandonment for the real-world feature represented in the feature class<\/SPAN><\/P>

    DEPTH: The distance from the top of the structure to its bottom; measured in feet<\/SPAN><\/P><\/DIV><\/DIV><\/DIV>", "summary": "A point feature class that represents fittings, which are facilities found at the joint between two pipes where a transition occurs.", "title": "GISC.DBO.wsFitting_POINT", "tags": [ "fitting" ], "type": "", "typeKeywords": [], "thumbnail": "", "url": "", "minScale": 150000000, "maxScale": 5000, "spatialReference": "", "accessInformation": "Created by the GIS Consortium's members with ongoing updates.", "licenseInfo": "

    This data constitutes proprietary materials and intellectual property of the GIS Consortium's members and will remain their property. It may only be used according to the terms of the signed data sharing agreement entered into by the GIS Consortium member(s) and the requesting party.<\/SPAN><\/P><\/DIV><\/DIV><\/DIV>" }