{ "culture": "en-US", "name": "", "guid": "", "catalogPath": "", "snippet": "A point feature class that represents meters, which are facilities that are used to measure the volume of water consumption.", "description": "
OBJECTID: <\/SPAN>System-generated unique identifier for each record within the feature class<\/SPAN><\/P> Shape: <\/SPAN>System-generated geometry type of the feature<\/SPAN><\/SPAN><\/P> GEODBID: <\/SPAN>Three-digit code that assigns editing responsibility to a community in the GIS Consortium<\/SPAN><\/SPAN><\/P> FEATUREID: <\/SPAN>GIS-Consortium-generated unique identifier for each record within the feature class. All FEATUREIDs start with the GEODBID of the community that owns the record<\/SPAN><\/P> DATECREATED: <\/SPAN>Date/time stamp from the moment the GIS record was created<\/SPAN><\/SPAN><\/P> DATEMODIFIED: <\/SPAN>Date/time stamp from the last moment the GIS record was changed<\/SPAN><\/SPAN><\/P> SOURCE: <\/SPAN>Organization that provided the data. The GIS Consortium standard is to preface the source with the three-letter municipal code of the community providing the data, followed by a dash. Example: VGV-Public Works<\/SPAN><\/SPAN><\/P> SOURCETYPE: <\/SPAN>Accuracy context for the record<\/SPAN><\/SPAN><\/P> AncillaryRole: <\/SPAN>Attribute that indicates whether the junction pushes (source) or pulls (sink) flow in a geometric network. Default setting for the GIS Consortium is none.<\/SPAN><\/SPAN><\/P> Enabled: <\/SPAN>Boolean field to indicate whether water is allowed to flow through this feature<\/SPAN><\/P> INSTALLDATE: <\/SPAN>Date of installation for the real-world feature represented in the feature class/table<\/SPAN><\/SPAN><\/P> LOCATIONDESCRIPTION: <\/SPAN>Statement illustrating the whereabouts of a feature<\/SPAN><\/P> LIFECYCLESTATUS: <\/SPAN>Current state of the real-world feature<\/SPAN><\/SPAN><\/P> SUBTYPE: Additional designation of the feature. Includes the following:<\/SPAN><\/P> Unknown<\/SPAN><\/P><\/LI> Compound<\/SPAN><\/P><\/LI> Current<\/SPAN><\/P><\/LI> Detector Check<\/SPAN><\/P><\/LI> Magnetic Orifice: <\/SPAN>a magnetic field is applied to a metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines; requires a conducting fluid and an electrical insulating pipe surface.<\/SPAN><\/P><\/LI> Pitot<\/SPAN><\/P><\/LI> Proportional: <\/SPAN>comprising a chamber housing for a preassembled meter chamber, a bypass plate, and a bypass for mounting within a maincase. The bypass and bypass plate, in cooperation with one another, provide an essentially unrestricted flow path for water to flow through the maincase with little headloss. The chamber housing and bypass plate cooperate to form a flow path for a portion of the water entering and leaving the maincase, so that this portion may be metered by the positive displacement meter<\/SPAN><\/P><\/LI> Positive Displacement<\/SPAN><\/P><\/LI> Sonic: <\/SPAN>battery operated meter that uses sound waves to measure well water level<\/SPAN><\/P><\/LI> Venturi: <\/SPAN>a defined construction with in the meter body which causes an increase in flow velocity at the constriction resulting in a corresponding decrease at that point<\/SPAN><\/P><\/LI> Propeller<\/SPAN><\/P><\/LI><\/UL> ELEVATION: <\/SPAN>Ground level height of real-world feature; measured in feet above sea level<\/SPAN><\/SPAN><\/P> WATERTYPE: <\/SPAN>Designation of water distribution or collection system to which the feature applies<\/SPAN><\/SPAN><\/P> DIAMETER: <\/SPAN>width of the real-world feature represented in the feature class; measured in inches<\/SPAN><\/P> FLOWRANGE: The flow range of the meter<\/SPAN>; units of measure are explained in the field<\/SPAN><\/P> MEASUREMENTDATE: The date the last measurement was recorded for the meter<\/SPAN><\/P> DEVICEID: Unique device identifier<\/SPAN><\/P> COMMUNITYID: <\/SPAN>Unique identifying code selected by the community<\/SPAN><\/SPAN><\/P> OWNERSHIP: <\/SPAN>Organization with jurisdiction over the real-world feature represented in the feature class<\/SPAN><\/P> MAINTAINED: <\/SPAN>Organization responsible for the care of the real-world feature represented in the feature class<\/SPAN><\/P> DESCRIPTION: <\/SPAN>Statement illustrating the feature<\/SPAN><\/P> FID_WSJUNCTIONANNO_LINE: <\/SPAN>Unique identifier that can be joined to the FEATUREID field of the wsJunctionAnno_LINE feature class to provide a link between the feature and its label.<\/SPAN><\/P> FID_WSUNDERGROUNDENCLOSURE_POLY: Unique identifier that can be joined to the FEATUREID field of the wsUndergroundEnclosure_POLY feature class to provide a link between the feature and its enclosure.<\/SPAN><\/P> REPLICAFILTER: <\/SPAN>Code used to filter data for the creation of custom geodatabases <\/SPAN><\/SPAN><\/P> PRODUCTIONNOTES: <\/SPAN>Technical notes from GIS personnel<\/SPAN><\/SPAN><\/P> WEBLINK: <\/SPAN>URL for a website related to the record<\/SPAN><\/SPAN><\/P> GlobalID: <\/SPAN>System-generated unique identifier for each record that is required in replicated geodatabases<\/SPAN><\/SPAN><\/P> MODEL: The model of meter<\/SPAN><\/SPAN><\/P> MANUFACTURER: The manufacturer of the meter<\/SPAN><\/SPAN><\/P> DEPTH: The distance from the top of the structure to its bottom; measured in feet<\/SPAN><\/SPAN><\/P> <\/P><\/DIV><\/DIV><\/DIV>",
"summary": "A point feature class that represents meters, which are facilities that are used to measure the volume of water consumption.",
"title": "GISC.DBO.wsMeter_POINT",
"tags": [
"meter"
],
"type": "",
"typeKeywords": [],
"thumbnail": "",
"url": "",
"minScale": 150000000,
"maxScale": 5000,
"spatialReference": "",
"accessInformation": "Created by the GIS Consortium's members with ongoing updates.",
"licenseInfo": " This data constitutes proprietary materials and intellectual property of the GIS Consortium's members and will remain their property. It may only be used according to the terms of the signed data sharing agreement entered into by the GIS Consortium member(s) and the requesting party.<\/SPAN><\/P><\/DIV><\/DIV><\/DIV>"
}