{ "culture": "en-US", "name": "", "guid": "", "catalogPath": "", "snippet": "A line feature class that represents pressurized mains, which are pipes that use pressure to move water uphill.", "description": "

OBJECTID<\/SPAN>: System-generated unique identifier for each record within the feature class<\/SPAN><\/P>

Enabled<\/SPAN>: Boolean field to indicate whether water is allowed to flow through this feature<\/SPAN><\/SPAN><\/P>

GEODBID<\/SPAN>: Three-digit code that assigns editing responsibility to a community in the GIS Consortium<\/SPAN><\/SPAN><\/P>

FEATUREID<\/SPAN>: GIS-Consortium-generated unique identifier for each record within the feature class. All FEATUREIDs start with the GEODBID of the community that owns the record.<\/SPAN><\/P>

DATECREATED<\/SPAN>: Date/time stamp from the moment the GIS record was created<\/SPAN><\/SPAN><\/P>

DATEMODIFIED<\/SPAN>: Date/time stamp from the last moment the GIS record was changed<\/SPAN><\/SPAN><\/P>

SOURCE<\/SPAN>: Organization that provided the data. The GIS Consortium standard is to preface the source with the three-letter municipal code of the community providing the data, followed by a dash. Example: VGV-Public Works<\/SPAN><\/SPAN><\/P>

SOURCETYPE<\/SPAN>: Accuracy context for the record<\/SPAN><\/SPAN><\/P>

COMMUNITYID<\/SPAN>: Unique identifying code selected by the community<\/SPAN><\/SPAN><\/P>

PIPEID<\/SPAN>: GIS tracking identification number for the feature<\/SPAN><\/P>

LEGACYTYPE<\/SPAN>: Retired GIS tracking code for the feature<\/SPAN><\/SPAN><\/P>

ADMINISTRATIVEAREA<\/SPAN>: Owner of the area in which the feature is located<\/SPAN><\/SPAN><\/P>

SUBTYPE<\/SPAN>: Additional designation of the feature. <\/SPAN><\/SPAN>Includes the following:<\/SPAN><\/P>

  • force: pipeline that conveys water under pressure from the discharge side of a pump or pneumatic ejector to another structure<\/SPAN><\/P><\/LI>

  • pressure: pipelines that are interconnected with pumps on each property and transfer water to another structure<\/SPAN><\/P><\/LI>

  • pipe bridge: structure used to carry a pipe or group of pipes across a barrier such as a river<\/SPAN><\/P><\/LI>

  • vacuum: closed pipeline that is under negative pressure allowing fluid to move through the pipe<\/SPAN><\/P><\/LI><\/UL>

    LIFECYCLESTATUS<\/SPAN>: Current state of the real-world feature<\/SPAN><\/SPAN><\/P>

    WATERTYPE<\/SPAN>: Designation of water distribution or collection system to which the feature applies<\/SPAN><\/SPAN><\/P>

    PRESSURERATING: The pressure rating of the feature; measured in pounds per square inch (PSI)<\/SPAN><\/P>

    JOINTTYPE1: <\/SPAN>Type of connection between the structure and the pipe<\/SPAN><\/SPAN><\/P>

    FDIR: Invert location from the perspective of the structure. For example, WEST indicates that the west invert on the structure is the starting point for flow<\/SPAN><\/P>

    UPSTREAMINVERT: The invert elevation (interior bottom) of the upstream end of the feature; measured in feet above sea level<\/SPAN><\/P>

    JOINTTYPE2: <\/SPAN>Type of connection between the structure and the pipe<\/SPAN><\/SPAN><\/P>

    TDIR: Invert location from the perspective of the structure. For example, EAST indicates that the east invert on the structure is the end point for flow<\/SPAN><\/P>

    DOWNSTREAMINVERT: The invert elevation (interior bottom) of the downstream end of the feature; measured in feet above sea level<\/SPAN><\/P>

    SLOPE: The slope of the feature, expressed as a decimal<\/SPAN><\/P>

    MATERIAL<\/SPAN>: Matter composition of the feature<\/SPAN><\/P>

    ROUGHNESS: The roughness coefficient of the feature<\/SPAN><\/P>

    DEPTH<\/SPAN>: The distance from the bottom of the structure and the ground surface above; measured in feet<\/SPAN><\/P>

    DIAMETER<\/SPAN>: Width of the real-world feature represented in the feature class; measured in inches<\/SPAN><\/P>

    MEASURELENGTH: Length of the pipe; measured in feet<\/SPAN><\/P>

    PIPECLASS: The class rating of the feature<\/SPAN><\/P>

    LININGTYPE: The lining type (interior coating) of the feature<\/SPAN><\/P>

    GROUNDSURFACETYPE: The type of ground surface over the feature<\/SPAN><\/P>

    EXTERIORCOATING: Material used to coat the outside of the pipe<\/SPAN><\/P>

    FLOWMEASUREMENTID: Discharge rate, measured in cubic feet per second unless otherwise indicated<\/SPAN><\/P>

    WORKORDERID<\/SPAN>: Unique work order identifier<\/SPAN><\/SPAN><\/P>

    OPERATIONALAREA<\/SPAN>: Retired field used to store a description for an operational area designated by a community<\/SPAN><\/SPAN><\/P>

    OWNERSHIP<\/SPAN>: Organization with jurisdiction over the real-world feature represented in the feature class<\/SPAN><\/P>

    MAINTAINED<\/SPAN>: Organization responsible for the care of the real-world feature represented in the feature class<\/SPAN><\/P>

    INSTALLDATE<\/SPAN>: Date of installation for the real-world feature represented in the feature class<\/SPAN><\/P>

    FID_SSEDGEANNO_LINE<\/SPAN>: Unique identifier that can be joined to the FEATUREID field of the ssEdgeAnno_LINE feature class to provide a link between and edge an its label<\/SPAN><\/P>

    DESCRIPTION<\/SPAN>: Statement illustrating the feature<\/SPAN><\/P>

    DISPLAYRANK: Retired field used for cartographic display on maps<\/SPAN><\/P>

    GlobalID<\/SPAN>: System-generated unique identifier for each record that is required in replicated geodatabases<\/SPAN><\/SPAN><\/P>

    REPLICAFILTER<\/SPAN>: Code used to filter data for the creation of custom geodatabases<\/SPAN><\/P>

    PRODUCTIONNOTES<\/SPAN>: Technical notes from GIS personnel<\/SPAN><\/SPAN><\/P>

    WEBLINK<\/SPAN>: URL for a website related to the record<\/SPAN><\/SPAN><\/P>

    REGIONALAGENCYID<\/SPAN>: Retired field used to store a unique identifier for a regional agency with a relationship to the feature<\/SPAN><\/SPAN><\/P>

    LOCATIONDESCRIPTION: Statement illustrating the whereabouts of a feature<\/SPAN><\/P>

    Shape<\/SPAN>: System-generated geometry type of the feature<\/SPAN><\/SPAN><\/P>

    Shape.len<\/SPAN>: System-generated length of the feature<\/SPAN><\/SPAN><\/P><\/DIV><\/DIV><\/DIV>", "summary": "A line feature class that represents pressurized mains, which are pipes that use pressure to move water uphill.", "title": "GISC.DBO.ssPressurizedMain_LINE", "tags": [ "pressurized main" ], "type": "", "typeKeywords": [], "thumbnail": "", "url": "", "minScale": 150000000, "maxScale": 5000, "spatialReference": "", "accessInformation": "Created by the GIS Consortium's members with ongoing updates.", "licenseInfo": "

    This data constitutes proprietary materials and intellectual property of the GIS Consortium's members and will remain their property. It may only be used according to the terms of the signed data sharing agreement entered into by the GIS Consortium member(s) and the requesting party.<\/SPAN><\/P><\/DIV><\/DIV><\/DIV>" }